|
Xado
- Manual Transmission, Gear Boxes, Reducers
NOT
for use in Automatic Gearboxes - please use XADO for
Automatic Gearboxes
XADO
- How much is required?
The amount of XADO required
depends on he volume of oil in your gearbox etc. Due to the fact that each
transmission or gearbox has different issues, each application also requires
a different quantity of XADO to achieve lasting
results. In reality it is difficult for us to assess
your exact requirements, therefore each application is
designed to cover the worst case scenario.
Once you have
completed the full recommended treatment,
you will receive a 1 year guarantee, though
from experience the application will last
significantly longer, which in most
cases will exceed the your lifetime ownership of the
vehicle.
Note: Remember
once you have completed the full treatment our products DO NOT require re application every 20,000
miles, unlike other products on the market.
Application
method:-
1 blister pack is all
that is required for the average motor car, but again
this depends on the volume of the oil. See the
table below.
Squeeze out the
contents of the number of tubes required into the oil
filler neck of the gear box, transfer case or
reducer. Run the vehicle or gearbox as normal.
After 50 hours or
1,500 km the treatment will be complete.
| Lubrication
system capacity ltrs. |
Number
of tubes |
Treatment
scheme |
| 1 to
2 |
1 |
Single
Application |
| 2 to
5 |
2 |
Single
Application |
| 5 to
8 |
3 |
Single
Application |
|
|
