Xado
- Fuel Equipment & Pumps
This
XADO product is specifically formulated to restore the
internal workings of HPFP (High Pressure Fuel Pumps). It
will also provide vital future protection against wear and
tear. If you want to maximize the potential of your
engine, you should also revitalize your fuel pump.
XADO
- How much is required?
The amount of XADO required
depends on he Cubic Capacity of your engine. Due to the fact that each
fuel pump or equipment has different issues, each application also requires
a different quantity of XADO to achieve lasting
results. In reality it is difficult for us to assess
your exact requirements, therefore each application is
designed to cover the worst case scenario.
Once you have
completed the full recommended treatment,
you will receive a 1 year guarantee, though
from experience the application will last
significantly longer, which in most
cases will exceed the your lifetime ownership of the
vehicle.
Note: Remember
once you have completed the full treatment our products DO NOT require re application every 20,000
miles, unlike other products on the market.
Application
method:-
Squeeze out the
contents of the number of tubes required into
the fuel tank, based upon the
table below, making sure there is fuel in the tank.
If you have a
modern restricted fuel tank aperture dissolve the
contents of the tubes in a small quantity of fuel
and then add this to the tank. A syringe to
inject the mixture into the tank may also be
helpful.
Add 40-60 liters of
fuel to the tank.
Run the car
as normal
After 100 hours or
3,000 km the treatment will be complete.
| Engine
Cubic capacity ltrs. |
Number
of tubes |
Treatment
scheme |
| 0 to
5 |
1 |
Single
Application |
| 5 to
15 |
2 |
Single
Application |
| 15 to
30 |
3 |
Single
Application |
| 30
to 75 |
4 |
Single
Application |
| 75
to 100 |
5 |
Single
Application |
| 100
to 140
|
6 |
Single
Application |
|
|
