XADO
Gels for Petrol & Diesel Engines - (over 1000cc)
XADO
- How much is required?
The amount of XADO required
depends on he volume of oil or fuel in your engine, gearbox
or fuel tank etc. Due to the fact that each
engine has different issues, each application also requires
a different quantity of XADO to achieve lasting
results. In reality it is difficult for us to assess
your exact requirements, therefore each application is
designed to cover the worst case scenario.
The recommended
number of Petrol or Diesel engine blister packs is 3, however,
in reality we have found that most customers are satisfied
with the results after using just one or two blister
packs. Each blister pack is applied
individually, so you do not have to purchase all
three blister packs at the same time.
Once you have
completed the full recommended treatment,
you will receive a 1 year guarantee, though
from experience after using the Petrol or Diesel
Engine blister packs, the application will last for
approximately 100,000 klms which in most
cases will exceed the your lifetime ownership of the
vehicle.
Note: Remember
once you have completed the full treatment our products DO NOT require re application every 20,000
miles, unlike other products on the market.
Application
method:-
Treatment of the engine
with the oil system 3-10 liters.
Step 1
1. Squeeze out the contents of one tube into the oil
mouth of the engine warmed up to the running
temperature.
2. Start the engine and let it idle for 5-10
minutes.
Step 2
Do as described in Step 1 after 100-250 km run
Step 3
Do as described in Step 1 after 100-250 km run
Dosage:
| Oil
system volume, L |
3-10 |
11-20 |
21-30 |
| Tubes
(9 ml), pcs |
3 |
6 |
9 |
| Treatment
scheme |
1+1+1 |
2+2+2 |
3+3+3 |
| Tubes
for new engines |
2 |
4 |
6 |
|
Petrol
Engines
Diesel
Engines
Click
to view |
